Die Inventor FAQ wird unterstützt von:

Inventor FAQ Logo

19.05.2011

Inventor 2011: Service Pack 2 verfügbar

Heute hat Autodesk den SP2 für Inventor 2011 online gestellt.

Vor der Installation des SP2 muss der Sp1 installiert werden.

Auszug aus der Readme Datei:

Dynamic Simulation

          • Blank items in Mechanism Status display after you run Unknown Force.
          • CER: A crash occurs with automatic update of Dynamic Simulation joints after assembly restructure.
          • In Win7/Vista, you cannot save a .cgd curve file to a location other than the assembly file.
          • When you re-open an assembly saved in simulation mode, the Automatic joint creation option is checked.

    Stress Analysis

          • A memory leak occurs after you generate a report with images.
          • Contacts information does not display in the Report.
          • If you use invalid characters in a Report name, the message "Address not valid" displays in the .mht report.
          • Material section for Weldment assemblies is missing in Report.
          • Maximum value label displays the edited maximum value of the color bar.
          • Memory usage increases while you run Animate.
          • NG: Various "Degenerate Element" meshing issues occur.
          • Out of date flag is shown changing stop criteria to a higher value than already achieved.
          • While you set an absolute value for the color bar, negative probe values do not change to absolute values.

    Frame Analysis

          • CER: Various crashes occur with simulate command and beam customization.
          • CER: Various crashes occur with beam model update.
          • When you leave the Frame Analysis environment, material opacity set at translucent changes to opaque.
          • If you use invalid characters in a Report name, the message "Address not valid" displays in the .mht report.

    Tooling

          • Cannot Start Windows in Safe Mode after installation of Inventor 2011.

    Tube & Pipe

          • CER: Inventor crashes on a 64 bit machine when you use Make Adaptive to the instanced Tube & Pipe Runs.

    Cable & Harness

          • Improved performance in AutoRoute with high Wire count.

    Autodesk Inventor 2011

        API

          • Addition of radius or diameter dimensions fails on a circular arc projected from a B-spline curve.
          • AddWithOptions does not place an occurrence in the correct position.
          • DrawingDocument.Update fails after you change the references for certain data in the drawing document.
          • Enhance the OnFileResolution event to provide the referenced file type using Context("IsForeignFile").
          • FileSaveCount always increases by one, even on saves of un-dirtied part documents.
          • In FileManager, GetLevelOfDetailRepresentations returns a different order before and after you open an assembly document.
          • NG: DesignProject.Activate causes the alterable pointing to the design project references to an invalid design project.
          • RelativeFileName within the FileAccessEvents.OnFileResolution event returns wrongly.
          • Scalable text graphics do not display correctly after you save and reopen a document.
          • Set FileMetadata.FullFileName does not update the path on dialog boxes of Make Part/Make Component.
          • The position of Leader note text flips when you update a drawing document in invisible mode.

    Assembly Modeling

          • Alpha sort component command works slowly in one large assembly.
          • Assembly work features are named to the English language when you install SP1 on a German localized Inventor.
          • Cannot select a COG sphere after you show COG.
          • Elements in an assembly pattern cannot be made visible if the pattern is not visible.
          • Grip Snap does not allow Precise input, and freezes after accepting only one digit.
          • Incorrect result shows when you use iMate to place a component with the option "Automatically generate iMates on place".
          • Insert constraint does not work on a folded part.
          • Inventor shows the last used LOD before save rather than the LOD selected during open.
          • Mass doubles when you create a Substitute LOD.
          • NG: Bill of Materials shows incorrect quantity for components in nested patterns when the pattern count is controlled by the iAssembly table.
          • NG: In an assembly pattern, when the total occurrence count of a component becomes too big, the performance is very slow.
          • Sheet metal components in an assembly do not update when you invoke a Rebuild All.
          • The assembly browser does not return to the top level assembly after an edit to the weld folder in a subassembly.
          • The Weld features in the authored iCopy templates are lost after you instance an iCopy.
          • Transitional constraint fails during driving constraint.

    Content Center

          • A crash occurs when you update one special and remote custom library.
          • Column Properties Expression settings do not work if there are two or more custom parameters.
          • Families with file names containing $ are not treated as standard components.
          • Replace from Content Center replaces the length of the replaced parts with the default length for Structural Shapes Families.
          • The Change Size dialog box does not show the current size for the structural shapes families published from iParts.

    Direct Manipulation

          • A crash occurs in commands to create or modify a model if you cancel after measuring on a mini toolbar.
          • A crash occurs when you select and drag the face on one special data.
          • Invalid value in the mini tool bar does not change to red after you insert the measured value.
          • NG: On edit, wrong focus on the mini tool bar occurs when you hover the mouse on a browser node.
          • Create Fillet, Create Chamfer and Edit Extrude commands started from contextual mini toolbars had wrong prompting in the status bar.

    Drawing Manager

          • Fixed incorrect "Member out of date" notification in Drawing view browser node.
          • NG: Center marks dimension incorrectly to the ends of a slot that is created with the extrude feature from a tangent plane.
          • NG: CER: A crash sometimes occurs when you change the column width in a parts list that displays an iProperty string containing a tab character.
          • NG: In drawings, you cannot retrieve a dimension for a feature from a multiple-use shared sketch when features based on it are unsuppressed.
          • NG: Unable to balloon components promoted from a table replaced iAssembly with a phantom BOM structure.
          • NG: View Cube settings are not accessible while you create a custom drawing view.
          • Some retrieve dimensions that do not project to an XY sheet plane, jump after model updating.
          • When you open a drawing with Customer Templates on Vista and Windows 7, the message "an unnamed file has a bad format" displays.

    Framework

          • CER: A crash occurs when you bring up two or more Open File dialog boxes through Inventor API.
          • CER: A crash occurs when you invoke a Work Plane feature from the search box in the Application Menu.
          • CER: A crash occurs when you quickly activate the Open Document list two or more times from Document Tabs.
          • CER: A crash occurs when there is a "Set End of Part" error during the Extrude command.
          • CER: A crash occurs when there is a "Vector too long" error during creation of a Hole feature.
          • CER: A crash occurs when you switch multiple displays mode between Single and Dualview from the NVIDIA control panel.
          • Embedded images are lost when you save a copy of a document as a new document.
          • NG: In the Color Style edit box, the maximum texture scale is limited to 1000%.
          • No warning dialog box displays when you open a file from the MRU (most recently used) list, even if this file is not in the active project.
          • Pressing the S key does not create a 2D Sketch on a selected Work Plane.
          • The visibility option on the context menu does not work well for inserted images in Drawing documents.

    Frame Generator

          • After you update a frame member, its part number is reset, even if the option "Get Frame Member's Part Number from Content Center" is cleared.
          • Some assemblies that consist of frame members generated by Frame Generator did not migrate correctly in Inventor 2011 RTM/SP1.

    Graphics

          • CER: Inventor crashes after finishing an animation in Stress Analysis with Dynamic Section on.
          • CER: Inventor crashes in a drawing file if you hover the mouse on a logo picture while you click "Home" to zoom.
          • CER: Inventor crashes when you edit a sketch after using undo and redo several times.
          • Line weights are not visible after you pan.
          • NG: Draft Analysis gives incorrect results in graphics compatibility mode on Windows XP.
          • Zebra Analysis does not work well with German operating system settings.

    iLogic

          • iLogic Activation Error message no longer displays (and prevents iLogic from loading) if there is a corrupted user.config file.

    Part Modeling

          • All assembly constraints are lost when you modify iParts.
          • Bitmap is not visible in the title block if it is not pre-existent in the drawing.
          • CER: A crash occurs when you invoke the Copy object command and select the component in an assembly.
          • CER: Inventor crashes when you use Insert dwg in Sketch, and select PC from the network.
          • Inventor hangs during a Hole edit in sheet metal if you try to change the placement.
          • Legacy parts that incorrectly define a work plane on a non-planar face display errors on rebuild.
          • NG: Fixed incorrect result for Polar Moment in Cross Section analysis when the section contains multiple disconnected areas.
          • Unable to highlight objects during a boundary patch.
          • When you switch a Hole from Simple to Tapped, the thread size disregards the diameter size.
          • Work feature edit does not update in the 3D Sketch environment.

    Sketch

          • A crash occurs when you delete 3D sketch geometry if you pause the mouse over overlapped geometries.
          • CER: A crash occurs when you import a .dwg with the option "no new sketch".

    Sheet Metal

          • The preview for a corner chamfer does not update on changing values.

    Studio

          • NG: Studio Rendering crashes sometimes on multi-core CPUs.

    Translators

          • A crash occurs when you publish some drawings with complicated views to DWF or PDF.
          • A retrieved model sketch that contains geometry text changes after DWGout.
          • An unexpected exit occurs when you edit a tapered thread that was migrated.
          • Cannot export derived Alias data to IGES and STEP formats.
          • Cannot import a Fusion DWG file into Inventor.
          • CER: A crash occurs when you export a face to DXF.
          • CER: Inventor crashes when you export IDW to DXF.
          • If the plane of a curve is perpendicular to the drawing paper, DWF publish project a 3D curve to a polyline, and not a line.
          • It takes a long time to export an Inventor .dwg as an AutoCAD Mechanical .dwg with the option "Parts only" turned on.
          • Missing zeroes in broken view dimensions after DWGOUT.
          • Imported CATIA V5 file has distorted faces in the model.
          • Imported JT file has incorrectly trimmed spheres.
          • The detail output of AEC Exchange with a Shrinkwrap assembly does not show in Revit.
          • Wrong characters are exported when publishing some drawings to PDF.

    Vault

          • A crash occurs when you undo twice after create a note within a sketch.
          • Inventor Vault add-in is not loaded by default after SP1 installation, even if Vault Client is already installed.

    Others

          • After you edit the model, a bolted connection requires a resolve.
          • Inventor crashes when you press Ctrl+F in a presentation file.

Keine Kommentare:

Kommentar veröffentlichen

War der Beitrag hilfreich oder hast du eine Ergänzung dazu?
Ist noch eine Frage offen?
Ich freue mich auf deine Rückmeldung!

Hinweis: Nur ein Mitglied dieses Blogs kann Kommentare posten.

Related Posts Plugin for WordPress, Blogger...
Inventor FAQ Newsletter. Emailadresse: